The default IP address to access a router’s admin panel is 10.0.0.0.1 to 10.0.0.1. It is frequently entered incorrectly as 10.0.0.0.1, which results in an invalid website.
10.0.0.1 is a member of the private class of IP addresses and is used to access the router’s admin panel. The router manufacturer sets it by default, and you must log in to the Admin Panel in order to modify the router’s settings, including the WiFi Password and Name (SSID).
How can I access 10.0.0.1?
You can view the router’s settings by logging in to 10.0.0.1 with the default username and password. You only need to be connected to the router to access the settings, and logging in isn’t that difficult. To log in to 10.0.0.1, quickly follow these instructions.
Launch the web browser of your choice.
Enter http://10.0.0.1 or 10.0.0.1 in the address bar. The IP address 10.0.0.0.1 does not exist, therefore do not type it.
The manufacturer’s login page for your router will show up. Enter the password and username by default.
Pro Tip: Your WiFi network username and password are different from this one. The default, if you haven’t modified it already, is:
Login name: admin
You will be logged into your router’s Admin Panel if the username and password you entered are accurate.
Note: For security reasons, it is advised that you change your default password if you are accessing your router’s settings page for the first time. If you leave your wireless network open, someone else may be able to access it and obtain private data, including credit card numbers and passwords.
Create a strong password with at least eight characters and include both uppercase and lowercase numbers.
Make sure your password is strong, with at least eight characters, both capital and lowercase letters, and a special character like! @ # $?
Required Credentials:
| Brand of Router | Username | Password |
| LPB Piso Wifi | Admin | 123456789 |
| Comcast/ Xfinity | Admin | 392502850 |
What Problems Could You Face with 10.0.0.1?
You might run into a number of problems when attempting to enter the admin panel at 10.0.0.1, including:
Slow Response Time: Try using alternate IP addresses, such as 127.0.0.1:7860, 127.0.0.1:49342, 127.0.0.1:62893, or 127.0.0.1:57573, if you get a notice saying that “10.0.0.1 took too long to respond.” Check for loose connections or restart your router to fix any possible hardware problems if the issue continues.
Inaccurate IP Address Entry: Verify that the IP address is being entered accurately. 10.0.0.1 is often confused with 10.10 0.1 or 10.0.0.0.1, which is incorrect. You will be redirected to a search engine rather than the network settings if you type the wrong address. The URL will likewise become invalid if “https://” is used at the beginning.
Unresponsive Gateway Device: Technical issues may be the cause of an error message stating that your gateway is not responding. Try restarting your router to see if it fixes the problem.
Misassigned Client Addresses: Wireless devices may occasionally be automatically assigned IP addresses that differ from 10.0.0.1. Device settings may need to be adjusted as a result of connectivity problems.
Can’t get into 10.0.0.1? Here’s what to do-
It could be the following if you are experiencing trouble accessing 10.0.0.1:
The browser cannot find the Admin Panel at 10.0.0.1 because your router or device’s default gateway address is different than 10.0.0.1. Try again after determining the correct gateway address.
The IP address you are entering in the browser’s URL bar is incorrect. Users occasionally input www.10.0.0.1.com, add https:// at the start, and mistakenly enter “0” (zero) for “O” or 10.0.0.0.1, which is an invalid gateway address. Your inability to access the Admin Panel is caused by the IP address’s four decimal places, which are written in dot-decimal format. In this case, the IP address has five values.
The most popular solution is to reset your router and WiFi network. Prior to reconnecting to your network, wait a minimum of a few minutes.
Make sure you can access other websites; if your ISP experiences network failures during peak hours, you can run into this problem.
Try clearing the cache and cookies that your browser has stored locally on your device.
You can reset your gateway to its factory default settings if there was any misconfiguration during your last session. Unplug your router and press the tiny “reset” button on the back of it for ten seconds to return your router configuration to its original settings. The modem has successfully reset when the router’s front lights begin to blink.
Note: Factory reset is not the same as “restart” because it will restore all of your manual settings, including your MAC filter, password, guest networks, and SSID (network name). It should be your final resort if all other options have failed.
Any WiFi-connected devices, including laptops, smartphones, and TVs, will be disconnected throughout this process. Until the gateway is back online, you won’t be able to make or receive any calls, even emergency calls, if you use Xfinity Voice.
Configuring an Advanced Wireless Gateway:
Your wireless gateway’s security settings are set to WPA/WPA2 by default. This is the best WPA security available right now because the previous version was weak, allowing hackers to remotely access your internet. However, you might be able to adjust the Wireless Settings to suit your needs.
When adding a game to your home network, you can also set up a firewall, parental control (to prevent access to specific websites), IP & MAC binding, bandwidth restriction, port forwarding, or port triggering.
Although it is recommended that you enable automatic firmware updates to protect your router, you can manually download and install the software from the manufacturer’s website every two to three months if this option is not available.
Write and Win: Participate in Creative writing Contest & International Essay Contest and win fabulous prizes.
About the Author
