Page 33 - Mousumi
P. 33

Weaver                                                             Monomousumi.com


                    the tiny cardboard snow take 2 small         first keep a small piece and stick it on
                    blades  size  2cms  breadth  2cms,  and      the  wooden  piece  and  stick  another
                    insert them into the holes by shoulder       piece  now take 2 CD and a big tape
                    them two with different colour wires         bottom line and attach it between two
                    and  keep  the  motar  in  between  the      CDs.  Now  take  a  big  permanent
                    blades  into  the  hole and  close  the      marker sketch and cut it bottom end
                    cardboard and glue it. Your motar is         like two sided and cut it’s up and keep
                    ready.                                       it on the two pieces of the wood and
                                                                 glue them very strongly. Take a sketch
                    How  to  make  a  wi-fi  routers
                                                                 and keep it inside the 2 cds and glue it
                    athome  with  house  held
                                                                 on  the  both  sides  now  take  an   iron
                    objects?                                     spatula  and  bent  it  like  this.  After
                    Take  two  spoons  and  keep  it             doing  like  this  keep  it  by  heating
                    paralyzed and glue it very strongly and      inside the sketch a side so that we can
                    take a wire and then from the bottom         easily rotate
                    of  the  spoon  tie  copper  wire  to  the   Take  a  motar  and  a  light  and  attach
                    midpoint.  Same  process  for  the           the  wires  of  the  light  to  motor  very
                    second spoon also take a button and          firmly
                    tie its copper wire to the bottom the        Now  stick  the  motor  with  glue  and
                    two  spoons  take  staples  and   attach     take a rubber band and fix it to the cd
                    them on each of the spoons now take          to the motar
                    a wire and tie it on the two sides on        Your generator is ready.
                    the  bottom  after  the  completion
                    process  stick  the  end  very  strongly.    How  to  make  a  speaker  at
                    Take a 2 wires and tie it to, the two        home?
                    edges  below  the  staples  take  two        Take a bottle and cut it in the up cut
                    springs and let them stand on the two        off the cap part and keep a magnet in
                    spoons by sticking a three sided plug
                                                                 it and stick it now take an insulated
                    and stick it to the two spoons bottom.
                                                                 copper wire and  turn it on a paper
                    Now  attach  a  phone  plug  to  it  and
                                                                 50-60 times till it squirts. After that
                    after keep it to your phone your wifi
                    router is ready.                             make a plaster out for this and glue
                                                                 the paper and stick it to the bottle
                    How  to  make  a  generator  at
                                                                 now fix the bottle cap part and take a
                    home?
                                                                 5.5 aux Jack cut and fix it to the wires
                    A  generator  is  a  device  which  turns
                                                                 now fix it with a glue and take a black
                    mechanical energy into electricity
                                                                 paper and cut it into a piece which
                    Take  a   big  wooden  piece  and  take      will fix in the top of the bottle mouth.
                    two  wooden  small  pieces  and  a  CD
                                                                 Your speaker is ready for this time.











                                                           Page 32
   28   29   30   31   32   33   34   35   36   37   38