Page 32 - Mousumi
P. 32
Weaver Monomousumi.com
HOW TO MAKE BINARY DEVICES
WITH HOUSE HELD MATERIALS?
By N. Hemanth Sai
attach all the card board together.now
take a refill and sand paper and rub
on it and after doing this thing we
have to keep the cardboard sheets in
it and cut the edges of it after
applying glue on the cardboard centre
now we have to take this card board
and attach to the refill of aluminium
sheets which we had bent somewhat
after attaching the cardboard apply
glue on the centre of the cardboard
refill .Now take a pure copper wire
How to make a Motar? and add those wire s to those to the 1 st
gap of the cardboard after completing
The limited amount of the plan is to the thing attach it to the bent and do
cut the small a metamor of wires from the same process for all of it.
the top and bottom line. Now we Shoulder these vents .and add some
must do the magnets as the small gum to the aluminium bent Now take
ones so that we can fit the magnets in a compass and draw a round around
the cardboard
2cms and breadth draw 15.5cms.Now
After this we need to take a bicycle attach the 2 nd card board roundly and
spoke and cut into 5cms, and take a apply glue to the all sides of the card
pen refill tape its edges to prevent any board and place some small magnets
damage, and take some aluminium uptown 9 magnets 2 sides now take a
sheets and bend it at the edges nail holder and cut it some, what and
keep in the small hole of the
And take a cardboard and circle it
cardboard 2cms, add some glue to it
with a compass at a glance of 4cms
,and take a pencil and scale take a line Now take another 2cms card board
segment of 9cms from the centre of with compass and attach the nail
the circle ,take a protracter, see all the holder in the small hole,now make
sides and mark the 3 sides with two holes two sides of the cardboard
pencil, now cut it into 6 pieces so that and attach two small card boards in
we can attach easily now apply gum the 2cms card board and make very
to those all 6 card board pieces and small hole with blade shaped holes in
Page 31
